Quelltext der Seite Datei:Thomas Yeates, Penrith No.12 Circa 1820 (1).jpg

Thomas Yeates, Penrith No.12 Circa 1820 (

'''Reproduced by kind permission of [http://www.antique-watch.com/ Pieces of Time]''' - '''E-Mail: [mailto:info@antique-watch.com info@antique-watch.com]'''

An early 19th Century English Debaufre in a gilt open face case.  Full plate gilt keywind movement with resting barrel, polished steel Geneva stopwork.  Pierced and engraved bridge cock with polished steel coqueret.   Plain three arm polished steel balance with blue steel spiral hairspring, gilt Bosley regulator.  Debaufre escapement employing two polished steel escape wheels acting alternately on a single steel roller.  Winding through the white enamel dial, Roman numerals, gold hands. Plain gilt metal open face case, the movement hinging out at 9 o'clock, , maker's mark "WB" in a rectangle. Signed:Thos Yeates Penrith No.12.

A rare escapement, also known as a chaffcutter, Ormskirk or club footed verge.  It was the first frictional rest escapement invented by Debaufre in 1704. Rarely used until it was taken up by Lancashire makers early in the 19th Century.  The escapement is not affected by variations in power as was the case with the verge and some watches dispense with the fusee.  See Chamberlain's "Its About Time" page 123 for a description of a similar escapement.   A low numbered example from a maker listed in Baillie.

==Lizenz==
Please note that all content, text and images on this site are the copyright of Pieces of Time. However you may use any of the images or text (unless it displays a copyright notice of another individual or company ) with the following restrictions:
*Pieces of Time is acknowledged in a form similar to "reproduced by kind permission of Pieces of Time". 

*In the case of a commercial venture our address and URL must also be included in an appropriate place.

*If you are publishing on the Internet please feel free to include a link(s) to any text page on our site without the need to include an acknowledement. 
*We would of course be grateful if you would inform us that you have used our material but this is not a requirement. If you are considering publishing a traditional paper document we may be able to supply images of resolution suitable for that medium.