The Beauty of the Invisible: Unterschied zwischen den Versionen

Aktuelle Version vom 5. August 2011, 00:02 Uhr

The Beauty of the Invisible

Glashütte, August 2011

Traditional finish techniques at A. Lange & Söhne

A. Lange & Söhne timepieces of the 21st century constitute the link to a heritage that began in Saxony more than 165 years ago. From the very beginning, Ferdinand A. Lange described his business philosophy as follows: “With the knowledge that quality craftsmanship always assures the most advantageous purchase, we are aware that we can render the best service to our clientele by supplying only watches of the highest class.” Lange still upholds this commitment to the ethics of the artisan, because this alone creates a little piece of eternity in an ever changing world.

Indeed, A. Lange & Söhne timepieces still feature quality hallmarks that were once the norm in high-end watchmaking, but which were gradually abandoned in favour of costeffectiveness in production. Among the typical hallmarks are the surface finishes applied to nearly all movement parts. For the owner of such a piece of art, the composition of aesthetic details is matched by the mechanical precision of the movement. Every single one of them illustrates the manufactory’s uncompromising quest for perfection.

Here is an overview of the most important finish techniques:

Sunray finish

The sunray finish

The sunray finish is mainly used on bigger wheels and parts of the framework. The graining results in a spirally pattern.

Glashütte ribbing

The Glashütte ribbing

The Glashütte ribbing emulates a gently rippled effect. The pattern decorates the three-quarter plate and some other large parts of the framework.

Circular graining

The circular graining

Circular graining is used on round shapes such as wheels. Unlike most other finishes, this one is applied by rotating the part around the tool.

Linear finish

The linear finish

The fine lines in a parallel direction are achieved by sliding a part in one direction over a piece of abrasive paper.

Perlage

The perlage

The perlage consists of small, overlapping circles, achieved with a rotating grinding tip. In A. Lange & Söhne watches, it is mainly used for bridges and plates.

Flat polish

The flat polish

The mirror-smooth surface of the flat polish is achieved by rubbing the part in a figure-eight motion on special foils coated with diamond dust.

Chamfering

At Lange every single bevel on almost all parts is polished by hand, at an angle of exactly 45 degrees. Sharp inner corners are particularly challenging.

Contour grinding

The contours of all framework components are given a matt finish to create a vivid interplay with the polished edges.

Black polish

The black polish

Black polish – the most sophisticated and challenging finishing technique – is performed exclusively on the tourbillon bridge and cage. It can take up to five days to polish one single part.

Engraving

The engraving

The engraving turns each A. Lange & Söhne timepiece into a unique and personal belonging: Every balance cock is hand engraved with lavish floral elements by one of six master engravers.

@@ Zeile 1: / Zeile 1: @@
 '''The Beauty of the Invisible'''
+Glashütte, August 2011
 ''Traditional finish techniques at A. Lange & Söhne''
-A. Lange & Söhne timepieces of the 21st century constitute the link to a heritage that began in Saxony more than 165 years ago. From the very beginning, [[Ferdinand A. Lange]] described his business philosophy as follows: “With the knowledge that quality craftsmanship always assures the most advantageous purchase, we are aware that we can render the best service to our clientele by supplying only watches of the highest class.” Lange still upholds this commitment to the ethics of the artisan, because this alone creates a little piece of eternity in an ever changing world.
+[[A. Lange & Söhne]] timepieces of the 21st century constitute the link to a heritage that began in Saxony more than 165 years ago. From the very beginning, [[Ferdinand A. Lange]] described his business philosophy as follows: “With the knowledge that quality craftsmanship always assures the most advantageous purchase, we are aware that we can render the best service to our clientele by supplying only watches of the highest class.” Lange still upholds this commitment to the ethics of the artisan, because this alone creates a little piece of eternity in an ever changing world.
 Indeed, [[A. Lange & Söhne]] timepieces still feature quality hallmarks that were once the norm in high-end watchmaking, but which were gradually abandoned in favour of costeffectiveness in production. Among the typical hallmarks are the surface finishes applied to nearly all movement parts. For the owner of such a piece of art, the composition of aesthetic details is matched by the mechanical precision of the movement. Every single one of them illustrates the manufactory’s uncompromising quest for perfection.
@@ Zeile 19: / Zeile 21: @@
 <br style="clear:both;" />
 [[Datei:Kreisschliff.jpg|thumb|Circular graining]]
-=== The Circular graining ===
+=== The circular graining ===
 Circular graining is used on round shapes such as wheels. Unlike most other finishes, this one is applied by rotating the part around the tool.
 <br style="clear:both;" />
-[[Datei:Strichschliff.jpg|thumb|Strichschliff]]
+[[Datei:Strichschliff.jpg|thumb|Linear finish]]
-=== Der Strichschliff ===
+=== The linear finish ===
-Der Strichschliff zeichnet sich durch eine feine, parallel laufende Linienstruktur aus. Sie entsteht durch Reiben des Werkstücks auf Schleifpapier in Längsrichtung.
+The fine lines in a parallel direction are achieved by sliding a part in one direction over a piece of abrasive paper.
 <br style="clear:both;" />
 [[Datei:Perlage.jpg|thumb|Perlage]]
-=== Die Perlage ===
+=== The perlage ===
-Perlage nennt man die kleinen, einander überlagernden Kreisschliffe, die durch einen rotierenden Schleifstift erzeugt werden. Mit diesem Muster werden vor allem [[Brücke]]n und [[Platine]]n dekoriert.
+The perlage consists of small, overlapping circles, achieved with a rotating grinding tip. In A. Lange & Söhne watches, it is mainly used for [[Bridge|bridges]] and plates.
 <br style="clear:both;" />
-[[Datei:Flachpolitur.jpg|thumb|Flachpolitur]]
+[[Datei:Flachpolitur.jpg|thumb|Flat polish]]
-=== Die Flachpolitur ===
+=== The flat polish ===
-Bei der Flachpolitur entsteht durch das behutsame Reiben eines Werkteils auf extrem feinkörnigen Diamantfolien in achtförmigen Bewegungen eine spiegelglatte Oberfläche.
+The mirror-smooth surface of the flat polish is achieved by rubbing the part in a figure-eight motion on special foils coated with diamond dust.
 <br style="clear:both;" />
-[[Datei:Fasenpolitur.jpg|thumb|Fasenpolitur]]
+[[Datei:Fasenpolitur.jpg|thumb|Chamfering]]
-=== Die Fasenpolitur ===
+=== Chamfering ===
-Bei der Fasenpolitur werden die auf exakt 45 Grad angeschrägten Kanten der Werkteile von Hand poliert. Eine besondere Herausforderung stellen die spitzen Winkel der innen liegenden Ecken dar.
+At Lange every single bevel on almost all
+parts is polished by hand, at an angle of exactly 45 degrees. Sharp inner corners are particularly challenging.
 <br style="clear:both;" />
-[[Datei:Umfangschliff.jpg|thumb|Umfangschliff]]
+[[Datei:Umfangschliff.jpg|thumb|Contour grinding]]
-=== Der Umfangschliff ===
+=== Contour grinding ===
-Beim Umfangschliff erhalten die Konturen der Gestellteile eine matte Oberfläche, die einen lebendigen Wechsel zu den polierten Fasen schafft.
+The contours of all framework components are given a matt finish to create a vivid interplay with the polished edges.
 <br style="clear:both;" />
-[[Datei:Schwarzpolitur.jpg|thumb|Schwarzpolitur]]
+[[Datei:Schwarzpolitur.jpg|thumb|Black polish]]
-=== Die Schwarzpolitur ===
+=== The black polish ===
-Die Schwarzpolitur ist die anspruchsvollste und zeitintensivste Art der Finissierung. Sie wird nur der [[Tourbillon]]brücke und dem Käfigoberteil zuteil. Die Politur eines einzigen Teils kann bis zu fünf Tage in Anspruch nehmen.
+Black polish – the most sophisticated and challenging finishing technique – is performed exclusively on the tourbillon bridge and cage. It can take up to five days to polish one single part.
 <br style="clear:both;" />
-[[Datei:Gravur.jpg|thumb|Gravur]]
+[[Datei:Gravur.jpg|thumb|Engraving]]
-=== Die Gravur ===
+=== The engraving ===
-Die Gravur lässt jeden Zeitmesser von A. Lange & Söhne zum Unikat werden: Jeder Unruhkloben wird von einem von sechs Meistergraveuren im freien Schnitt mit einem floralen Muster verziert.
+The engraving turns each A. Lange & Söhne timepiece into a unique and personal belonging: Every balance cock is hand engraved with lavish floral elements by one of six master engravers.
 __NOTOC__ __NOEDITSECTION__
@@ Zeile 57: / Zeile 60: @@
 [[de:Die Schönheit des Unsichtbaren]]
+[[Category:Watch-Wiki news archive 2011]]