Datei:Omega Gangmodell um 1907-1927 (2).jpg

Omega Swiss Lever Escapement Model.

Omega, 7. The high quality straight lever escapement model has shaped brass plates, shaped silvered-brass screwed posts, brass wheel-work on heavy steel shafts, a brass anchor with hardened steel pallets, a club-tooth escape-wheel and two banking posts. The impulse roller has a polished steel impulse pin that is regulated by a screwed aluminum balance wheel with a flat steel hairspring. The going barrel is housed in the shaped aluminum base and is wound from below. It will run approximately 10 hours on a wind. Each of the individual pieces are stamped with a '7'. The engraved Omega name on the top plate is in a font that was used by the Omega Watch Co. from 1907-1927.

This escapement model was accompanied by an applied plaque engraved with 'R A Brown'. The jewelry firm 'R A Brown' was located in a prestigious retail area of St. Paul, MN in the beginning of the 20th century. Size: 9.25in. Long 4in. Wide 3.5in. High

Sundial Farm Antique Clocks Ltd.

Lizenz

Alle Bildrechte liegen bei Steven Thomson. Diese Abbildung ist urheberrechtlich geschützt und steht nicht unter einer freien Lizenz. Für anderweitige Nutzungen außerhalb von Watch-Wiki ist die schriftliche Zustimmung des Urheberrechtsinhabers nötig.