Datei:Dent No. 17280 Zifferblattseite.jpg

Dent No. 17280 Zifferblattseite.

A very rare mid 19th Century English lever watch with montre … tact in a slim gold open face case. Gilt three quarter plate keyless movement with going barrel, Nicole's patent steel winding work above the plate. Engraved cock with polished steel regulator, compensation balance with blue steel spiral hairspring. English lever escapement. Small engine turned gold dial with subsidiary seconds, Roman numerals, blue steel hands. Engine turned 18 carat open face case, clip on back with small engraved motto in the centre, gold crown and bow. The gold dial set within a wide bezel which has a hand that can be rotated clockwise until it reaches the position of the hour hand. This can then be used to tell the time by using touch pieces set at the hours on the engine turned middle. Between the touch pieces the quarters are indicated by indentations in the band. The touch piece at 11 o'clock is also used to set the time. Maker's mark "AN" in a rectangle, number matching that on the movement. Signed E. J. Dent Watchmaker to the Queen London Patent 17280, Hallmarked London 1851 Diameter 49 mm. Very few watches were made with montre à tact. Most examples seen are by Breguet who frequently used this form of mechanism. The watch was probably manufactured for Dent by the firm of Nicole Nielsen. Adolphe Nicole took out the patent for keyless winding in 1844. See the Camerer Cuss Book of Antique Watches page 40 and "The Art of Breguet"by George Daniels page 63.

Lizenz

Please note that all content, text and images on this site are the copyright of Pieces of Time. However you may use any of the images or text (unless it displays a copyright notice of another individual or company ) with the following restrictions:

• Pieces of Time is acknowledged in a form similar to "reproduced by kind permission of Pieces of Time".

• In the case of a commercial venture our address and URL must also be included in an appropriate place.

• If you are publishing on the Internet please feel free to include a link(s) to any text page on our site without the need to include an acknowledement.
• We would of course be grateful if you would inform us that you have used our material but this is not a requirement. If you are considering publishing a traditional paper document we may be able to supply images of resolution suitable for that medium.